UeeVii CPE852 Dual Band 2.4G 300Mbps | 5.8G 900Mbps Wireless Bridge With Bracket Mount, 2Pcs

• What CPE852 Is: UeeVii CPE852 is a long-distance dual-band 2.4GHz & 5.8GHz wireless transmission device. It uses wireless communication technology to transmit network data using air as a medium to perform long-distance point-to-point or point-to-multipoint interconnection. The working data link layer realizes the interconnection of local area networks 5KM.
• 2.4G&5.8G dual-band: CPE852 outdoor wireless bridge supports 2.4G 300Mbps, 5.8G 900Mbps dual-band transmission, compatible with 2.4G and 5.8G devices. The WDS networking method is adopted, and the video network is dual-compatible to realize network expansion and monitoring range expansion.
• Gigabit Wireless bridge: This point to point WiFi bridge is equipped with a 100Mbps and a 1000Mbps RJ45 port, the 100Mbps port can be used for power supply, and the Gigabit port can help you obtain a higher network speed. This internet bridge support Gigabit 24V POE power supply, which is easy for installation and deployment.
• 5KM long-distance transmission: This ueevii wireless bridge builts-in a 15dbi high-gain 5G frequency antenna and a 9dbi high-gain 2.4G frequency antenna, and the working distance can reach up to 5KM (Barrier-free). Which is widely used for extending your network or surveillance to shops, garages, barns, etc.
• Suitable for outdoor use: This outdoor network bridge is rainproof, lightningproof, dustproof, and cold-resistant. You can pair them by dialing code, which is very simple and efficient for use. The CPE852 wifi bridge kit is very suitable for outdoor point-to-point and point-to-multipoint application scenarios.

Step 1. Use a PoE adapter to power the wireless bridge through a network cable. Pay attention to the "PoE" and "LAN" ports marked on the PoE adapter, and power is supplied by POE instead of a DC power interface.

Step 2. Use a network cable to connect the CPE "LAN" port, connect the network cable other ends to the PoE Adapter "POE" port, use another network cable to connect to the "LAN" port of the PoE adapter, and connect the other end of the network cable to the computer's "LAN" port.

Step 3. Find the number of the Wireless Bridge CPE digital display tube. For example, the number is 1 and the CEP is the A master bridge, then the IP of this CPE is 192.168.255.101; if the CPE is the B slave bridge, then the IP address of the CPE is 192.168.255.201.（There is a table corresponding to a number and IP in the manual）

Step 4. Very important step: Modify your computer's IP address, change your computer's IP address to 192.168.255.xxx(192.168.255.xxx cannot be the same as the IP of the CPE), make your computer's IP and the bridge's IP address be on the same network segment so that you can access them. Please refer to the manual to modify the computer IP address step or Google searches how to modify the computer IP address, it is very simple.

Step 5. After you modify your computer's IP address, you open the computer browser and enter the IP address of the wireless bridge to access. For example, enter 192.168.255.101 to access.

Step 6. Enter the account password "admin/admin" to access, and set it after successful access.